Detailed instructions for using nano titanium dioxide photocatalyst CY05 for formaldehyde removal in indoor air treatment

Product model: CY05

Hangzhou Jiupeng New Materials

Detailed instructions for using nano titanium dioxide photocatalyst CY05 for formaldehyde removal in indoor air treatment

【 Product ingredients and efficacy 】

The main ingredient of the product is super active titanium dioxide, which is non-toxic and harmless, originating from nature. Super active titanium dioxide is rapidly dispersed and has good transparency. It can be gently shaken in water and immediately melted into a transparent liquid, which can be sprayed onto furniture surfaces and walls to form a uniform transparent nano coating. It can quickly capture and decompose harmful gases such as formaldehyde, benzene, methylbenzene, dimethylbenzene, ammonia, TVOC, etc. indoors. Suitable for home decoration and public facility construction, with excellent quality, low price, and simple and convenient use.

Dilution method

Use purified water, bottled water, or deionized water to make CY05 powder into an aqueous solution with a solid content of 0.5% -1%, and wait for spraying.

Factors affecting decomposition efficiency

The decomposition efficiency is inversely proportional to the particle size. The smaller the particle, the faster the decomposition efficiency. The higher the concentration of photocatalyst spray, the higher the UV intensity, and the faster the decomposition efficiency.

The Six Steps of Indoor Construction with Air Treatment Agents

1、 Prepare 0.5% -1% photocatalyst liquid

2、 Protect furniture, leather goods, and metal parts with cloth covers to remove oil and dust from the surface of furniture

3、 Spray painted walls

4、 Open windows for ventilation

5、 Turn on the fluorescent lamp to provide the amount of light

6、 Check in if the test meets the standards

【 Precautions 】

1. Attention should be paid to indoor dark colored furniture and high gloss furniture. It is recommended to use a 0.5mm caliber spray gun for construction. Metal stainless steel and other parts should not be sprayed, and protection should be taken before construction.

2. During furniture construction, it is important to focus on the rough surface of the furniture, including the sides, back, inside, and bottom of the furniture.

3. Do not spray onto the human body. If sprayed onto the eyes, wash thoroughly with running water.

4. When spraying, if the distance to the spraying surface is too close, the spraying liquid will flow and leave traces; If the distance from the sprayed surface is too far, white spots or reduced adhesion may occur. So follow the construction specifications and adhere to the spraying distance.

5. After CY05 photocatalyst spraying, clean the spraying equipment with clean water to prevent nozzle blockage and corrosion.

6. During construction, if the solution of this product is sprayed onto objects other than the spraying surface or flows onto other objects, it should be wiped clean in a timely manner.

7. In areas with moisture, dry thoroughly before spraying. Within 2 hours after spraying, the spraying surface must not come into contact with water.

8. Avoid construction in enclosed spaces and provide sufficient ventilation after construction.

9. For a building area of 100 square meters, it is recommended to use 100g of photocatalyst powder to achieve the best treatment effect.

[Packaging] 100g/bag, 20kg/barrel

【 Storage 】 Closed and stored at room temperature

【 Validity 】 3 years